FAQs
How do I cut down my walking stick?
It is important that the stick is the correct size for you. It will make it more comfortable, but also far more efficient when using it if it is the correct size.
How to measure the walking stick
The walking stick user needs to stand upright in the shoes they usually wear for walking, with their arms hanging naturally by their sides. Position the stick next to the user, making a small mark on the shaft of the stick, level with the bump at the bottom of the wrist bone.
The user's arm should be slightly bent at the elbow when they hold the handle, and their shoulders should be level.
I need to change the rubber ferrule on my walking stick. How do I know what size I need?
You can either measure the diameter of the stick, or the interior measurement of the ferrule you have removed.
Carbon fibre sticks usually have a 16mm ferrule. Most standard sticks use a 19mm ferrule. Thicker and bariatric sticks us either a 22mm or 25mm ferrule.
Linden Leisure seats use the B 19mm type ferrule (Quattro, Out & About and Trio models)
Shooting sticks will use 9mm ferrules.
Instructions for a folding walking stick
Folding and unfolding your walking stick
When you take your walking stick out of of the pouch the four sections of the stick will all lock into place with a click. Each section is held together by a stretchy cord that runs the length of the stick.
To fold up again, pull each section apart and hold together in the hands until the walking stick is put away into a carry pouch; or use a folding walking stick clip to hold it together.
Adjusting the height of your folding walking stick
- Loosen the collar in the top section of the shaft under the handle.
- Push in the spring loaded button.
- Find the height required by adjusting the two top sections ensuring that the button locates securely in one of the holes.
- When the desired height is achieved, tighten the collar. Please ensure this is fully tightened before use.
Instructions for a telescopic walking stick
- Loosen the collar near the bottom of the stick.
- Push in the spring loaded button.
- Find the height required by adjusting the two sections ensuring that the button locates securely in one of the holes.
- When the desired height is achieved, tighten the collar. Please ensure this is fully tightened before use.
What different types of handles are available for walking sticks?
| Derby | Crutch / Fritz | Crook | Ergonomic | Knob stick | Stave |
I have a Linden seat that has broken. Is it possible to repair it?
We would need to see the seat first before commenting, so please email details of where and when you purchased the seat, along with a photograph of it to sales@able2.uk and we will then be able to advise you if we can repair it and the cost.
Is it possible to have the worn elastic cord in my Elite Packaway / Supaseat Foldaway replaced?
Yes it is – please send your seat to Able 2 UK Ltd. Moorgate Street, Blackburn, BB2 4PB. enclosing your full details including telephone number. We will then inspect the seat fully and will advise you of the cost before carrying out any repair.
Is it possible to take my seat stick on an aeroplane?
Yes, generally airlines will allow metal walking aids to be taken into the cabin, as long as they have gone through security scanners.